Firmware for antminer S17 & S17PRO, S17E, S17+

Antminer S17 and S17 PRO from the manufacturer Bitmain is the one of the latest model of ASIC miner, which boasts one of the highest hash rates of 67-73 TH / s and is downloaded for free from our website https://miningasic.com/. These two firmware models are practically the same in terms of performance, and yet we will describe both of them in detail.

The Antminer S17 is a very cost-effective model, the annual income from it is about 4,075 USD per year, taking into account the costs electricity that will power the entire mining system. This firmware is designed for 3 hash cards, and with it the system noise level will stay at 82dB, the device will heat up to a maximum of 45 degrees Celsius. When overheating, the firmware activates coolers, which will cool the processors and keep the temperature in the system at a constant level. Power consumption equals 2,385 W.

Bitmain Antminer S17 Pro is slightly better than its “little brother”. Its profitability is estimated to be much higher, at about 5,100 USD per year. The power rating is also better at 1975 W, which allows for energy savings, all other things being equal. After all, PRO version other indicators are almost the same as those of the S17 model.

The developers have again improved antivirus protection: a new web service with protection against threats – constant monitoring and updating of signatures online. The virus will be intercepted and destroyed even before it enters the system.

In addition, ASIC overvoltage and undervoltage are now available to users: with frequency, voltage and profile templates for boosting on each hash board (S17 to 79 + TH in air and up to 86TH in immersion baths, T17 up to 60TH. Setting the “immersive” parameter will automatically add the appropriate elements for the immersion baths in the profile selection menu.

There are several modes of operation of the firmware that the user can select depending on their preferences:

  • S17 (air mode)
  • S17 (immersive mode)
  • T17 (air mode)
  • S17 (dive mode enabled)

Updated control interface, as well as sensors for problems and various faults … This is done in order to protect gateways from viruses that can pull in mined funds or simply destroy the system from the inside. In this case, the process is automatically suspended, the cleaning system is turned on, and only after that the process on the farm resumes in complete safety. At the same time, you do not need to restart the program: the command for automatic reboot and resumption of the working process is encrypted in the firmware code. In this case, data is not lost, because bitmain antminer backs up data and settings.

How to install

  1. Download the from our website.
  2. Go to the interface, click the “System” tab, go to “upgrade”, go to “flash”. To save the pool worker and password, check the box next to Keep Setups.
  3. Enter the address of your antminer. If you can’t see the firmware, refresh the page. Then choose the language you want.
  4. Check all settings: passwords, pools and workers. This is done in: “Miner Configuration, General Settings”.
  5. Choose a suitable overclocking option (Mining Profiles, Preset).
  6. Click on the function: “Hash Rate Control”.
  7. Save all the settings. When you start the program, the antminer may restart. It will take about 30 minutes to fully configure and start.
ATTENTION: BEFORE INSTALLING THE FIRMWARE YOU MUST UNLOCK SSH (use file unlock ssh)!

Unlock SSH is working will all types of the Bitmain firmware except December 2019 If you have Bitmain firmware December 2019 or above you must use SD CARD (you can find it on our web page). After you can flash the asic by MSKminer firmware without unlock.

You can check the firmware version in the System - file system version

Get your firmware

Leave us a request to get a private firmware made to fit your needs.