Firmware for ASIC miners
The Mining Software Solution team has been developing firmware for Antminer ASICs for more than 3 years.
At the moment you can download firmware for Antminer S17e T17E S17 + T17 + S17 S17pro T17 S9 S9i S9j T9 + L3 + L3 ++
All MSS firmware underwent extensive testing before being officially released and became available for download. Compared to stock firmware from Bitmain, MSS firmware has a huge functionality that allows you to manage your ASICs quickly
and efficiently and increase the profitability of your equipment up to 50%. More detailed information on all the advantages of the Mining Software Solution firmware you can find on the website.
Advantages
Frequency up to 1175Mhz S9, above 850Mhz only for immersion cooling - up to 24TH
Improving energy efficiency by 25% (S9 to 80J / T - 80W / 1TH) and up to 40% (L3 + 1.25W / 1MH)
Fan control, deactivation of control fans for immersion immersion cooling — no more fooling coolers
Selection of paid voltage and frequencies automatically and manually. Fine tuning frequencies individually
Compatibility with all systems management and monitoring, AP. Parallel Dev fee mining, without drawdowns and suspension of main mining.
Automation for mass firmware S9 series — a patch with all settings and mass update, support for auto-numbering of workers
Mining Firmware for Bitmain ASICs
Прошивка на S9K
How to install Download the firmware from our website. Go to the interface, click the tab “System”, go to “upgrade”, go to “flash”. To save the pool worker and password, check the box next to Keep Settings. Enter the address of your S9K antminer. If the firmware is not visible, refresh the page. Then choose […]
Firmware for antminer T9+
Characteristics of the firmware antminer T9 +: Hashrate overclocking. Hashrate is overclocked up to 14 Th/s. Overclocking profiles. There are profiles for overclocking (depends on power supply capacity). Ventilator. You may use immersion cooling and turn off the ventilator. Asic boost. There is a new function: “ASIC BOOST”. Virus check. There is a function which […]
Firmware for antminer T17, T17E, T17+
Antminer T17 firmware characteristics: High power consumption. Effect from 20% to 60%. There is a function of automatic and manual tuning. Setting by chips, boards and profiles. Cooler operation became more adaptive. It is possible to reduce the power automatically at high temperatures and this feature is good for protecting against overheating. There is a […]
Firmware for antminer T15
How to install Download the firmware from our website. Go to the interface, click the tab “System”, go to “upgrade”, go to “flash”. To save the pool worker and password, check the box next to Keep Settings. Enter the address of your T15 antminer. If the firmware is not visible, refresh the page. Then choose […]
Firmware for Antminer S9SE
How to install Download the firmware from our website. Go to the interface, click the tab “System”, go to “upgrade”, go to “flash”. To save the pool worker and password, check the box next to Keep Settings. Enter the address of your S9SE antminer. If the firmware is not visible, refresh the page. Then choose […]
Firmware for antminer S9, S9i, S9j
Characteristics of firmware: The ability to cool the antminer up to 19 TH/s (on air cooling) and up to 22 TH/s (on immersion cooling) has appeared. When buying old equipment, which is often infected, there is an opportunity to automatically check the asic s9 for viruses with further elimination of all harms. It is possible […]
Firmware for antminer S19, S19J
Firmware characteristics of S19/ S19J: Hashrate overclocking. Hashrate is overclocked from 150 TH/s to 190 TH/s. 140 TH/s – 150 TH/s – at 4.5-5 kWh power consumption (without power supply upgrade). 170 TH/s-190 TH/s- at power consumption of 7-8 kWh (with power supply upgrade). Recommended overclocking – 160 TH/s. There are options for overclocking and […]
Firmware for antminer S17 & S17PRO, S17E, S17+
Antminer S17 and S17 PRO from the manufacturer Bitmain is the one of the latest model of ASIC miner, which boasts one of the highest hash rates of 67-73 TH / s and is downloaded for free from our website https://miningasic.com/. These two firmware models are practically the same in terms of performance, and yet […]
Firmware for antminer S15
How to install Download the firmware from our website. Go to the interface, click the tab “System”, go to “upgrade”, go to “flash”. To save the pool worker and password, check the box next to Keep Settings. Enter the address of your S15 antminer. If the firmware is not visible, refresh the page. Then choose […]
Firmware for antminer L3, L3+
The Antminer L3 + / L3 ++ firmware was created for the safe overclocking of Asik, and here are some improvements awaiting you in this model: Ability to overclock up to 700 Mh / s and more Visual control of each chip (green, orange, red diodes will show you the type of problem and the […]